SISER P.S. EasyWeed HTV
Item No.
VHTSPSEW
EasyWeed is CAD Cutter compatible including all craft cutters. The Oeko-tex and VEGANOK certified film (HTV) has a thin finish which allows for direct overlaying with any “EasyWeed” product. With the ability to peel hot or cold, the huge array of colours offered and the amazing durability, it is one
Description
EasyWeed is CAD Cutter compatible including all craft cutters. The Oeko-tex and VEGANOK certified film (HTV) has a thin finish which allows for direct overlaying with any “EasyWeed” product. With the ability to peel hot or cold, the huge array of colours offered and the amazing durability, it is one of the most favourite products within the garment and craft industry.
• Available widths: 500mm and selected range at 300mm wide
• Full Siser range of colours available
• Layerable with all EasyWeed products
• Finishes: Vivid
• Adheres to: Cotton, Polyester, Poly/cotton blends, Leather. Not suited for treated and dye sublimated textiles
• Specification: 90 Micron, Adhesive polyester carrier
• Washing: Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not bleach or dry clean. Liquid fabric softener not recommended.
• Heat Application: Heat Press
Heat Press Instructions
1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
2. Preheat garment for 2-3 seconds
3. Apply design at 150°C (EasyPress® users add approx. 30°)
4. Use medium pressure for 15 seconds
5. Peel carrier hot or cold
• Available widths: 500mm and selected range at 300mm wide
• Full Siser range of colours available
• Layerable with all EasyWeed products
• Finishes: Vivid
• Adheres to: Cotton, Polyester, Poly/cotton blends, Leather. Not suited for treated and dye sublimated textiles
• Specification: 90 Micron, Adhesive polyester carrier
• Washing: Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not bleach or dry clean. Liquid fabric softener not recommended.
• Heat Application: Heat Press
Heat Press Instructions
1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
2. Preheat garment for 2-3 seconds
3. Apply design at 150°C (EasyPress® users add approx. 30°)
4. Use medium pressure for 15 seconds
5. Peel carrier hot or cold
Attachments
ORAJET 3954 Brick Stone
Item No.
3954
GDI Quick Foot Yellow - Hard Flex
Item No.
GDIGT151
GDI Little Foot Squeegee - Red
Item No.
GDIGT044
SISER HTV - P.S. Lumen Easyweed - 500mm
Item No.
VHTSPSEW-Lu-50