Aslan DFP 33 Print 'n Go Ant-Slip a s self-adhesive white digital printing film offering ideal conditions for short-term floor graphic applications.
For smooth interior floors and has a structured surface.
It is R9-certified for its DIN 51130-compliant anti-slip properties.
Common large format printing systems generate an excellent, scratchresistant print image and the film does not require an additional protective laminate.
Not only its slip-resistance, but also its direct printability and residue-free removability make this product a safe and a efficient floor graphics solution for applications at the point of sale, in airports, train stations, shopping malls, at
Face film: Plasticized PVC (monomeric softeners)
Thickness: ~ 125 μm
Adhesive: Acrylic pressure sensitive adhesive
Release liner: PE coated silicone cardboard
The material is printable with solvent, latex, UV curing and screen printing inks as well as
third generation latex inks. In case of insufficient drying of the printing inks, the film will be
sodded and the adhesive negatively affected.
The surface must be free of dust, grease and oil. The size of a single motive must be at least
0.5 m². The film is only suitable for applications on rough surfaces and has to be applied with
a heat gun and the ASLAN ApplicationRoll completely into the surface. The surface must
have a temperature of at least 12 °C. The temperature must not drop significantly within the
next 72 hours and it has to stay dry in order that the final adhesive strength is reached.
To prevent that the film peels off at the edges rounded corners are recommended. In
depressions the durability may be limited as water accumulates in these areas. Due to the
wide variety of possible surfaces own live tests are mandatory. High load might destroy or
detach the film. Humidity reduces the adhesive strength significantly. As most surfaces are
breathable water regularly gets between film and surface. The film must not be applied onto
smooth and polished surfaces because the adhesive strength will increase significantly and
removability cannot be guaranteed.
Print’nGo Street ASLAN DFP 36 can be removed without problems and in one piece for up
to six months. The film has to be removed slowly and carefully.
Before application the film can be stored for minimum 2 years from date of production. The
film must be stored at room temperature (15-25 °C) and a relative humidity of the air of 50-
60%. To avoid pressure points appearing on the roll surface, we recommend the rolls be
stored either vertical standing or for this purpose designed `hanging´ racks.
Up to 6 months indoors depending on mechanical load in central-European standard climatic conditions